For your business · Embedded networks

Electrical networks for buildings with many tenants

For multi-unit developments, we design and install the private electrical network behind the main connection, so on-site generation can be distributed and metered across tenancies.

Aerial view of a terrace building with solar panels spread across several roof sections

Your question

“Can our development share on-site solar between units, and what does it take?”

An embedded network is a private electrical network that serves several tenancies behind one parent connection. It allows on-site generation and storage to be shared and metered. It also comes with regulatory obligations, so the operating model is settled before design.

This usually fits when

  • New multi-unit residential or mixed-use developments
  • Commercial sites with several tenancies
  • Buildings that want to share rooftop solar between occupants
  • Retrofits where tenants share one main switchboard

Sizing

What the design depends on

These are the inputs we check before recommending a size. Numbers in your proposal are labelled as kW (power), kWh (energy) or estimate.

Number of tenancies and loads
Sets the network design, metering and protection.
Operating model
Who owns and operates the network and bills the occupants.
Regulatory requirements
Embedded networks need the right exemption or authorisation; the operator holds those obligations.
On-site generation and storage
Solar and battery capacity to be shared across the site.
kW
Power: panel, inverter or charger size
kWh
Energy: stored in a battery or produced over time
Estimate
Calculated before or during design, not measured
Measured
Read from monitoring or meter data

Scope

What is included, and what depends on the site

Included

  • Electrical design of the private network
  • Installation of switchgear, metering and cabling
  • Integration with on-site solar and storage
  • Commissioning

Depends on the assessment

  • Network operator, billing and regulatory registration
  • Developer and strata approvals
  • Main switchboard upgrades

Want to know what this looks like for your property?

Related project: the four-tenancy installation shares one rooftop array between residences using an energy-sharing device behind each meter, rather than an embedded network. It shows how we approach shared generation.

Multi-unit

Four-residence building · NSW

One rooftop array shared by four residences

Solar and a 40 kWh battery shared between four residences and the common area, with a switchboard upgrade and roof remediation.

  • kW 16 kW (Aiko 475 W panels)
  • kWh 40 kWh

Steps

How the work runs

  1. Site and data review

    Interval data or bills, roof drawings, switchboard capacity and how the site operates through the day and week.

  2. Feasibility and design

    System options sized to the load profile and roof, with the assumptions behind any generation or savings estimate stated in writing.

  3. Proposal and staging

    Scope, programme and, where it helps the budget, a staged plan. Shutdowns are planned around your operations.

  4. Delivery

    Project managers, engineers and electricians coordinate access, safety, installation, commissioning and network approvals.

  5. Monitoring and support

    Monitoring set up from day one, and maintenance or fault response when the site needs it.

Embedded networks: questions

Is an embedded network the only way to share solar?

No. Smaller buildings can share one array between units with an energy-sharing device behind each meter, as on our four-tenancy project. Which suits depends on the number of units and who will operate the network.

Who bills the occupants?

The embedded network operator, under the applicable regulatory framework. We will tell you at the outset which parts we deliver and which need a specialist operator.

Free quote · Embedded networks

Tell us about your property and what you want to achieve

Send a few basic details. Neo reviews what you need and comes back to you by phone or email to discuss it and, where needed, arrange an assessment.

What happens next

  1. We review your detailsYour property, usage and goals.
  2. We contact youBy the phone or email you give us, to ask what we still need.
  3. Assessment and written proposalSizes in kW and kWh, scope, and what depends on the site.

Request your free quote

Phone or email: give at least one.

Is this for a home or a business?
Selected from the page you came from. You can change it.
For example: “we export most of our solar and want a battery”, or “generation dropped after the summer”.

Have a recent electricity bill or photos of your switchboard? They help us size the system. We will tell you how to send them when we reply.

We use these details only to respond to your enquiry and prepare a quote. See our privacy policy.